Cisco ASR 920 series 설치 매뉴얼 - 페이지 16

{카테고리_이름} Cisco ASR 920 series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASR 920 series 36 페이지. Aggregation services router
Cisco ASR 920 series에 대해서도 마찬가지입니다: 시작하기 (6 페이지), 설치 매뉴얼 (42 페이지), 하드웨어 설치 매뉴얼 (46 페이지), 매뉴얼 (36 페이지)

페이지 인쇄

Installing and Removing SFP Modules

Figure 3-15

Step 3

Close the DC power supply guard.

Powering On the Router

After the router is either rack mounted or mounted on the wall, perform these tasks to complete the

installation:

•

Installing and Removing SFP Modules

These sections describe how to install and remove SFP modules. The modules are inserted into the SFP

module slots as depicted in

See the

match the wavelength specifications on the other end of the cable. For reliable communications, the

cable must not exceed the stipulated cable length.

Use only Cisco SFP modules on the Cisco router. Each SFP module has an internal serial EEPROM that

is encoded with security information. This encoding provides a way for Cisco to identify and validate

that the SFP module meets the requirements for the router.

For detailed instructions on installing, removing, and cabling the SFP module, see the SFP module

documentation.

Cisco ASR 920 Series Aggregation Services Router Hardware Installation Guide

3-16

Attaching the DC Power Supply

Power on the router.

Connect the front-panel ports. See the

installation.

Figure

Supported SFPs and PIDs

Chapter 3

Connecting to SFP Modules, page 3-20

3-17. These field-replaceable modules provide interfaces.

for the list of SFP modules that the router supports. Each port must

Installing the Cisco ASR 920 Series Router

to complete the

OL-32751-01