Cisco ASR 920 series 설치 매뉴얼 - 페이지 19

{카테고리_이름} Cisco ASR 920 series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASR 920 series 42 페이지. Aggregation services router
Cisco ASR 920 series에 대해서도 마찬가지입니다: 설치 매뉴얼 (36 페이지), 시작하기 (6 페이지), 하드웨어 설치 매뉴얼 (46 페이지), 매뉴얼 (36 페이지)

페이지 인쇄

1. Connect to the 10/100/1000 Ports

Installing the Cisco ASR 920 Series Router

Step 3

Close the DC power supply guard.

Power On the Router

After the router is either rack mounted or mounted on the wall, perform these tasks to complete the installation:

• Power on the router.

• Connect the front-panel ports. See the

Install and Remove SFP Modules

These sections describe how to install and remove SFP modules. The modules are inserted into the SFP module

slots as depicted in the figure below. These field-replaceable modules provide interfaces.

See the Supported SFPs and PIDs for the list of SFP modules that the router supports. Each port must match

the wavelength specifications on the other end of the cable. For reliable communications, the cable must not

exceed the stipulated cable length.

Use only Cisco SFP modules on the Cisco router. Each SFP module has an internal serial EEPROM that is

encoded with security information. This encoding provides a way for Cisco to identify and validate that the

SFP module meets the requirements for the router.

Connect to SFP Modules

Cisco ASR 920 Series Aggregation Services Router Hardware Installation Guide

Power On the Router

to complete the installation.