Cisco ASR-920-12CZ-A 구성 매뉴얼 - 페이지 5

{카테고리_이름} Cisco ASR-920-12CZ-A에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASR-920-12CZ-A 13 페이지. Aggregation services router
Cisco ASR-920-12CZ-A에 대해서도 마찬가지입니다: 하드웨어 설치 매뉴얼 (46 페이지)

페이지 인쇄

New Device Joining the Autonomic Network

The figure below illustrates how a new device joins an autonomic network.

Figure 2: New Device Joining the Autonomic Network

1 The new device sends out a hello message to the neighbor. In this case, the neighbor is part of an autonomic network domain.

2 The hello message includes the unique device identifier (UDI) of the new device.

3 The autonomic device acts as a proxy and allows the new device to join this autonomic network domain. The autonomic network

device advertises itself with the domain information to its Layer 3 neighbors.

4 The new device is validated with the autonomic registrar on receiving the autonomic network hello message from the neighbor

and thereby detecting the UDI information.

5 The new device advertises its domain certificate in its hello message with all neighbors. The neighbor information is exchanged

every 10 seconds.

Note

If the neighbor information changes, the entry is deleted and neighbor discovery is restarted. In the absence

of a domain certificate and devices working with UDI, UDI is exchanged at a 10-second interval.

Working of the Registrar

One device in the network is configured as the registrar to validate all new devices locally; and to accept all devices that try to join

the domain managed by the registrar. The registrar issues a domain certificate to devices using the domain name provided by the

administrator.

The domain name is a group of devices in the network managed by the same set of rules. Any neighbor

Note

communicating with the registrar using the UDI certificate is sent an invitation to join the domain by

registrar.