Cisco Business 250 Series 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Cisco Business 250 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Business 250 Series 17 페이지. Smart switches
Cisco Business 250 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (5 페이지), 자세히 알아보기 (10 페이지), 자세히 알아보기 (16 페이지), 빠른 시작 매뉴얼 (5 페이지), 빠른 시작 매뉴얼 (49 페이지)

Welcome

Thank you for choosing the Cisco 250 Series Smart Switch. These

switches are designed to be operational right out-of-the-box as a standard

switch. In the default configuration, it forwards packets between the

connecting devices after powered up.

Package Contents

• Cisco 250 Series Smart Switch

• Rackmount Kit

• Power Cord or Adapter

• This Quick Start Guide

• Pointer Card with China RoHS

• Technical Support Contacts

• EU Directives 1999/5/EC Compliance Information (for EU SKU only)

This guide familiarizes you with the smart switch layout and describes how

to deploy the switch in your network. For additional information, see

www.cisco.com/go/250switches

Before You Begin

Before you begin the installation, make sure that you have the following:

• RJ-45 Ethernet cables (Category 5e or higher) for connecting network

devices.

• Tools for installing the hardware. The rack-mount kit packed with the

switch contains four rubber feet for desktop placement, and two

brackets and twelve screws for rack-mounting. If the supplied screws

are lost, use replacement screws in the following size:

–

Diameter of the screw head: 6.9 mm

–

Length of face of screw head to base of screw: 5.9 mm

–

Shaft diameter: 3.94 mm

• The wall mount kit includes screws and anchors. If the supplied screws

are lost, use replacement screws in the following size:

–

Diameter of the screw head: 6.8 mm

–

Length of face of screw head to base of screw: 16 mm

–

Shaft diameter: 3.5 x 1.3 mm

Cisco 250 Series Smart Switches