Cisco Business 250 Series 자세히 알아보기 - 페이지 4

{카테고리_이름} Cisco Business 250 Series에 대한 자세히 알아보기을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Business 250 Series 16 페이지. Smart switches
Cisco Business 250 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (5 페이지), 자세히 알아보기 (10 페이지), 빠른 시작 매뉴얼 (17 페이지), 빠른 시작 매뉴얼 (5 페이지), 빠른 시작 매뉴얼 (49 페이지)

Wall Mount an 8 Port Switch

Step 3

After the brackets are securely attached, mount the switch with the front panel facing down. Make sure that the switch

is attached securely to wall studs or to a firmly attached plywood-mounting backboard. Wall-mounting a 24-port switch.

Wall-mounting a 24-port

Wall Mount an 8 Port Switch

To wall-mount a 8-port switch using mounting screws, follow these steps:

Step 1

Locate the screw template. The template is used to align the mounting screw holes.

Step 2

Position the screw template so that the edge that is marked as CABLE SIDE ENTRY faces toward the floor. Make sure

that the switch is attached securely to wall studs or to a firmly attached plywoodmounting backboard.

Step 3

Peel the adhesive strip off the bottom of the screw template.

Step 4

Attach the screw template to the wall.

Step 5

Use a 0.144-inch (3.7 mm) or a #27 drill bit to drill a 1/2-inch (12.7 mm) hole in the two screw template slots.

Step 6

Insert two screws in the slots on the screw template, and tighten them until they touch the top of the screw template.

Installing the mounting screws on the wall

Figure 3 Installing the mounting screws on the wall

Get To Know Your Switch