Accustic Arts Power ES 매뉴얼 - 페이지 11

{카테고리_이름} Accustic Arts Power ES에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Accustic Arts Power ES 13 페이지.

6 How to start the POWER ES – safety precautions

The unit can be switched on by pressing the mains power switch 1.

After switching on the mains power switch the red LED 13 and the blue LED 12 will turn on. After

approx. 5 seconds the red one will extinguish, while the blue LED stays on showing that the unit

is running.

IMPORTANT!

Switching on:

Always switch on the power amplifier last, i.e. after the other devices in your

system (preamplifier, CD player, etc).

IMPORTANT!

Switching off:

Always switch off the power amplifier first and then switch off the other devices

from the mains power.

IMPORTANT!

After switching the unit off please wait 30 seconds before switching it on

again.

Avoid unnecessarily frequent switching the power amplifier on and off. The high

amount of switch-on current is a heavy burden for the electrical components and

so the life of the unit will be shortened by this action.

WARNING!

During a thunderstorm please completely disconnect the unit from the mains

power by pulling out the mains plug.

7 Looking after your equipment

The POWER ES from ACCUSTIC ARTS

care taken with high quality devices. Clean the housing with a dry or slightly moistened cloth. Please

do not use any aggressive detergents or detergents which contain silicon.

The best way to clean the gold-plated or chromed front plate is with a mild non-aggressive fat-

dissolving detergent (e.g. glass cleaner). Use a very soft clean cloth and wipe the front plate with this

without exerting strong pressure. Never use abrasive agents or polishing agents with abrasive

particles.

IMPORTANT!

Do not place the unit in direct sunshine and avoid extreme changes in

temperature.

8 Troubleshooting

does not require special treatment in excess of the usual