Cisco C3850-NM-4-1G 매뉴얼 - 페이지 7

{카테고리_이름} Cisco C3850-NM-4-1G에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco C3850-NM-4-1G 15 페이지.
Cisco C3850-NM-4-1G에 대해서도 마찬가지입니다: 설치 (17 페이지)

Installing a Network Module

Interface

TenGigabitEthernet1/1/2

TenGigabitEthernet1/1/3

TenGigabitEthernet1/1/4

C3850-NM-4-10G Module

All ports in the C3850-NM-4-10G module default to 10 G and should be configured as TenGigabitEthernet1/1/1

through TenGigabitEthernet1/1/4, even when you are operating them as 1 G using SFPs. Only four interfaces

are valid; the other four should not be used even though they still show up in the CLI.

Table 7: C3850-NM-4-10G Module

Interface

GigabitEthernet1/1/1

GigabitEthernet1/1/2

GigabitEthernet1/1/3

GigabitEthernet1/1/4

TenGigabitEthernet1/1/1

TenGigabitEthernet1/1/2

TenGigabitEthernet1/1/3

TenGigabitEthernet1/1/4

In the C3850-NM-2-10G module, the first two parts are natively 1-G ports and the last two ports are natively

10-G ports. So, you configure the 1-G posts as GigabitEthernet1/1/1 through GigabitEthernet1/1/2, and

configure the last two ports as TenGigabitEthernet1/1/3 through TenGigabitEthernet1/1/4, even when you

are operating the last two ports as 1-G. Only four interfaces are valid, and the other four should not be used

even though they still show up in the CLI.

Table 8: C3850-NM-2-10G Module

Interface

GigabitEthernet1/1/1

GigabitEthernet1/1/2

GigabitEthernet1/1/3

GigabitEthernet1/1/4

TenGigabitEthernet1/1/1

Action

Disregard

Action

Disregard

Configure this interface

Action

Configure this interface

Disregard

Installing a Network Module

C3850-NM-4-10G Module