DiGiQuest FEL1P10 사용자 설명서 - 페이지 13

{카테고리_이름} DiGiQuest FEL1P10에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DiGiQuest FEL1P10 20 페이지.

The indicator on the front of the plate will turn off when the plate has

reached the selected temperature. The plate will then maintain the

temperature by turning on and off automatically.

To increase the temperature turn the thermostat clockwise, to decrease

the temperature turn the thermostat counterclockwise.

ATTENTION: the light will light up and turn off when the thermostat

trips, indicating that the set temperature level has been reached: even

when the light is off, the cooker is in operation. NEVER TOUCH THE

PLATE.

Place the container on the cooking plate. Do not leave the empty

container on the hotplate while it is running. Immediately introduce the

food to be cooked. NOTE: Use of accessories not recommended by the

manufacturer may cause damage.

After use, be sure to turn the thermostat to the OFF position and only

when the stove is completely cold remove the plug.

Some requirements for kitchen utensils:

a. For more efficient use, the cooking vessel must have a solid base

that is as uniform as possible.

b. The base diameter should be smaller than the diameter of the

hotplate.

c. Do not use kitchen utensils with convex, concave or irregular bases.

CLEANING

The appliance should only be cleaned if it is cold and unplugged from the

power outlet.

To clean the plate, use a soft, slightly damp cloth. Do not use abrasive agents.

Do not immerse in liquids.

DIGIQUEST ELECTRIC PLATE OBI10