Cisco Catalyst 2955 Series 문제 해결 매뉴얼 - 페이지 3
{카테고리_이름} Cisco Catalyst 2955 Series에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Catalyst 2955 Series 6 페이지. Ios software release 12.1(14)ea1
Cisco Catalyst 2955 Series에 대해서도 마찬가지입니다: 설치 참고 사항 (12 페이지), 제품 게시판 (3 페이지), 제품 지원 게시판 (6 페이지)
페이지 인쇄Chapter 5
Troubleshooting
Note
Diagnosing Problems
78-14944-03
If POST fails on the Catalyst 2955C-12 and 2955S-12:
Uplink port 13 LED blinks amber.
•
Uplink port 14 LED turns green.
•
If POST fails on the Catalyst 2955T-12:
Uplink port 1 LED blinks amber.
•
•
Uplink port 2 LED turns green.
The uplink port status LEDs provide system and status information during POST.
On the Catalyst 2955T-12, the uplink ports are labeled 1 and 2. On the
Catalyst 2955C-12 and 2955S-12, the uplink ports are labeled 13 and 14.
POST failures are usually fatal. Call Cisco Systems immediately if your switch
does not pass POST. See the
page
xxx.
Common switch problems fall into these categories:
•
Poor performance
No connectivity
•
Corrupted software
•
"Obtaining Technical Assistance" section on
Catalyst 2955 Hardware Installation Guide
Diagnosing Problems
5-3