DigiSender Plug'n'Go DX2000-LCD 사용자 설명서 - 페이지 10

{카테고리_이름} DigiSender Plug'n'Go DX2000-LCD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DigiSender Plug'n'Go DX2000-LCD 16 페이지. 5.8ghz single input ‘plug style’ wireless av sender

페이지 인쇄

DX2000-LCD - DigiSender® Plug'n'Go™ LCD

Troubleshooting

Picture Problems

The picture is present but

poor quality

POOR RANGE

1. The picture & sound quality is

affected by the Transmitter and

Receiver's location. Try position-

ing them in different locations.

The Transmitter and Receiver

should be connected to a mains

extension lead that can be

moved.

2. Try the other 3 available

Audio/Video channels ensuring

that the Audio/Video Channel

setting is the same on both the

Transmitter and Receiver.

3. Ensure the units are within the

usable range, normally this

would be 40m when passing

through 2 average internal walls.

Thicker or stone/granite walls

may lower the usable range of

this device.

Page 10

Q: What do you see on your second television?

I see a black or blank screen

Switch OFF your DigiSender® TRANSMITTER

What do you now see at the second TV?

I still see a Black Screen...

WRONG AV CHAN-

NEL SELECTED

1. Switch the Transmitter back

on.

2. Ensure the correct SCART

channel is selected on your sec-

ond television. Some televisions

feature multiple AV channels for

one or more SCART, phono and

S-Video inputs.

3. If available try another SCART

socket on the second television.

Please read this instruction manual carefully prior to installation

I now see a snowstorm or

blue screen...

RECEIVING BLANK

SIGNAL

1. Switch the Transmitter on.

2. Ensure the Transmitter is con-

nected to your source device

(such as your Satellite, Cable,

Freeview, DVD or VCR).

3. Ensure that your source device

is switched on.