DigiSender Plug'n'Go DX2000-LCD 사용자 설명서 - 페이지 13

{카테고리_이름} DigiSender Plug'n'Go DX2000-LCD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DigiSender Plug'n'Go DX2000-LCD 16 페이지. 5.8ghz single input ‘plug style’ wireless av sender

페이지 인쇄

Troubleshooting

Problems Controlling the Source Equipment

If you have any difficulty operating your source equipment remote control in your second room

please follow the advice below below:

1. Ensure you are using the correct remote control in the second room. For instance, if you are

trying to control your Satellite Receiver you will need to use the Satellite remote control.

2. Ensure the IR Emitter is facing the IR Sensor on your source equipment.

3. Move the IR Emitter further away from the source equipment.

4. Move the DigiSender® Plug'n'Go™ LCD Transmitter AND Receiver further away from other

electrical devices.

5. Try operating your source remote control closer to the IR Sensor.

6. Replace the batteries in your source remote control.

Please read this instruction manual carefully prior to installation

WATCH A VIDEO

INSTALLATION

& TROUBLESHOOTING GUIDE

Available online at: www.aei.eu/video

DX2000-LCD - DigiSender® Plug'n'Go™ LCD

Page 13