Cisco Catalyst 2960-XR 하드웨어 설치 매뉴얼 - 페이지 28
{카테고리_이름} Cisco Catalyst 2960-XR에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Catalyst 2960-XR 34 페이지.
Cisco Catalyst 2960-XR에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (25 페이지), 하드웨어 매뉴얼 (20 페이지)
페이지 인쇄
Installing SFP Modules
Step 6
Secure the AC power cord by pressing on the retainer.
Figure 23: Securing the Power Cord in the Retainer
Installing SFP Modules
Related Topics
SFP and SFP+ Module Slots
Installing an SFP or SFP+ Module
Before You Begin
When installing SFP or SFP+ modules, observe these guidelines:
• Do not remove the dust plugs from the modules or the rubber caps from the fiber-optic cable until you
• To prevent ESD damage, follow your normal board and component handling procedures when connecting
Catalyst 2960-X and 2960-XR Switch Hardware Installation Guide
28
are ready to connect the cable. The plugs and caps protect the module ports and cables from contamination
and ambient light.
cables to the switch and other devices.
Removing and installing an SFP or SFP+ module can shorten its useful life. Do not
Caution
remove and insert any module more often than is absolutely necessary.
Switch Installation
OL-28309-02