Cisco Catalyst 2960-XR 하드웨어 매뉴얼 - 페이지 17

{카테고리_이름} Cisco Catalyst 2960-XR에 대한 하드웨어 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Catalyst 2960-XR 20 페이지.
Cisco Catalyst 2960-XR에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (25 페이지), 하드웨어 설치 매뉴얼 (34 페이지)

페이지 인쇄
Cisco Catalyst 2960-XR 하드웨어 매뉴얼
Figure 9. FlexStack-Plus Module
1
FlexStack-Plus module
2
LED for Stack port 1
Color
Green
Port is active, cable is attached.
Off
The port is not active, no cable is attached.
This table lists the FlexStack-Plus module LED colors and their meanings.
Table 11 FlexStack-Plus Module LEDs
Switch
Stack with Catalyst 2960-X stack-capable
switches
Stack with Catalyst 2960-XR stack-capable
switches
Mixed stack with Catalyst 2960-S
and Catalyst 2960-X stack-capable switches
Table 12 Stack Configurations
RPS Connector
The Cisco RPS 2300 (model PWR-RPS2300) supports the Catalyst 2960-X switch.
Note
RPS is not supported on the Catalyst 2960-X 24PSQ-L switches.
Warning
Attach only the following Cisco RPS model to the RPS receptacle: RPS2300. Statement 370
Connect the switch and the redundant power system to different AC power sources.
3
LED for Stack port 2
Description
Number of Switches
in the Stack
8
8
4
Bandwidth
80 G
80 G
40 G