DigiSender Zentrum Control DG420 사용 설명서 - 페이지 7
{카테고리_이름} DigiSender Zentrum Control DG420에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DigiSender Zentrum Control DG420 10 페이지.
페이지 인쇄DG420 Operation Guide
Recording Satellite/Cable, DVD or
Camcorder on to your
The DigiSender Control Zentrum can be easily set to
transfer satellite/cable, DVD or Camcorder to VCR
DVD COPY FROM
SAT
POWER
1
VCR COPY FROM
SAT
To select the SCART input, locate
one of the following buttons on
your VCR remote control:
AUX
LINE
SCART
INPUT
AV
Page 14
VCR
without changing any SCART leads or affecting what
you watch on your main or second television.
VCR
AUX
DVD
AUX
2
Selecting the VCR record source:
Press the button (1) to cycle between the source
transferred to your VCR for recording. The
selected source will be indicated on the front
panel (2).
IMPORTANT NOTES:
Selecting 'DVD COPY FROM' will automatically
set your main TV source to DVD. You may
manually change this by pressing the 'Main TV'
button without affecting the copy.
You must select the correct SCART input on your
VCR for recording. For further information see
your VCRs instruction manual.
Online Support at www.digisender.net
continued...
1
POWER
1. 'POWER' Indicator. Indicates that power is present and the
device is switched on.
2. 'DEVICE' Control. Select what you watch in your second room -
Satellite/Cable, VCR, DVDR or Auxiliary.
2
1
1. 'Remote Relay' Channel. This must be set the same on both the
transmitter and receiver.
2. Video Output. Composite (CVPAL) Video Output suitable for
connection to a television.
3. Audio Output. Left & Right Stereo Audio Output suitable for
connection to a Hi-Fi or television.
4. TV SCART Output. For connection to your television.
Please read this instruction manual carefully prior to installation
DG420 Installation Guide
2
3
3. 'DEVICE' Indicator. Indicates which input is being transferred to
this receiver and thus what is being watched on the second TV.
3
4
5
6
5. 'Audio/Video' Channel. This must be set the same on both the
transmitter and receiver.
6. PSU. Connect to the supplied mains adapter (PSU)
Page 7