Cisco Catalyst 3032 시작하기 매뉴얼 - 페이지 20
{카테고리_이름} Cisco Catalyst 3032에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Catalyst 3032 34 페이지. Cisco systems catalyst blade switch getting started guide
페이지 인쇄Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide
Managing the Switch
Managing the Switch
Using the CLI
Using the Device Manager
Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide
20
After completing the initial setup and configuration steps, use the CLI, the device
manager, or other management options described in this section for further
configuration.
After setting up and installing the switch in your network, you can enter
Cisco IOS commands and parameters through the CLI. Access the CLI either by
connecting your PC directly to the switch console port or through a Telnet session
from a remote PC or workstation. You can also access the CLI through the server
chassis serial console port of the active Dell CMC. For more information, see the
hardware installation guide on Cisco.com.
The simplest way to manage the switch is by using the device manager that is in
the switch memory. This is an easy-to-use web interface that offers quick
configuration and monitoring. You can access the device manager from anywhere
in your network through a web browser. The device manager dashboard is shown
in
Figure
6.
OL-14317-01