FIBARO FGBHFS-101 운영 매뉴얼 - 페이지 6

{카테고리_이름} FIBARO FGBHFS-101에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. FIBARO FGBHFS-101 13 페이지. Water leak & temperature sensor
FIBARO FGBHFS-101에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (6 페이지)

페이지 인쇄

NOTE

Before

completing

the installation it is

recommended to test

sensor's operation by

placing the entire sen-

sor or sensor probe

onto water surface.

NOTE

Mounting

screws

shown in a diagram

are

not

included.

Choose a screw type

depending

the

building material it is

being attached to.

CAUTION

Sensor's contacts are

dedicated to flood de-

tection only. Do not

connect external volt-

age!

PHYSiCAL inSTALLATiOn

#4: Physical installation

To install the Flood Sensor simply place it sensor on a surface prone

to flooding.

Three electrodes underneath the device should evenly touch the sur-

face.

Extending Flood Sensor contacts with a wired probe:

if you want the accessory to be mounted on a wall or in a distance

from flooding source, sensor should be extended using an external

probe (not included).

we recommend using extension probes or cables designed to detect

water. Probes ends should be coated with non-corrosive metal.

Connection wires should not be longer than 3m and thicker than

18AwG (0.82mm