Cisco Catalyst 3110X 시작하기 매뉴얼 - 페이지 14

{카테고리_이름} Cisco Catalyst 3110X에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Catalyst 3110X 31 페이지. Catalyst switch module for ibm bladecenter
Cisco Catalyst 3110X에 대해서도 마찬가지입니다: 하드웨어 설치 매뉴얼 (48 페이지)

페이지 인쇄
Cisco Catalyst 3110X 시작하기 매뉴얼
Click Advanced Configuration, and enable these switch module features:
Step 8
a. External management over all ports
b. Preserve new IP configuration on all resets
The default setting is Disabled for these features.
If you have connected the StackWise Plus cables, the Advanced Configuration settings
Note
are not available. To access the Advanced Configuration settings, disconnect the
StackWise Plus cables.
Click Save to save your settings.
Step 9
Step 10 Exit the aMM web interface.
Step 11 Go to "Running Express Setup" to complete the switch module setup.
Running
Express Setup
To complete the Express Setup program, you will need this information from your system
administrator:
• Switch module password
• Telnet access password
• Names of the SNMP read and write community strings if you are going to use a
network-management program like CiscoWorks (optional)
• Host name, system contact, and system location (optional)
Follow these steps:
Launch a web browser on a PC that is connected to the Internet. Enter the IP address that you
Step 1
assigned in Step 7 of the "Assigning the Switch Module IP Address" procedure in the web
browser, and press Enter.
14