FIBARO FGBHMS-001 운영 매뉴얼 - 페이지 8
{카테고리_이름} FIBARO FGBHMS-001에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. FIBARO FGBHMS-001 14 페이지. Motion sensor.
motion, light & temperature sensor
FIBARO FGBHMS-001에 대해서도 마찬가지입니다: 운영 매뉴얼 (7 페이지), 빠른 매뉴얼 (18 페이지)
페이지 인쇄
8
i
NOTE
The accessory mea-
sures temperature in
the place of installa-
tion. Remember that
temperature
near
the ceiling may differ
from that on eye-level
or the floor.
i
NOTE
The accessory mea-
sures light intensity
in the place of instal-
lation, not where the
sensor is pointed.
FunCTiOnALiTY
#6: Functionality
Motion detection:
The Motion Sensor detects movement using PiR sensor and reports it
to your iOS device.
Blink of LeD indicates detected motion. Color of blink is dependent on
current ambient temperature (smooth transition through blue, green
and red). Brightness of blink is adjusted by measured light intensity.
Tamper detection:
The Motion Sensor detects tampering when accessory is moved and
reports it to your iOS device. Tampering is indicated with an alternate
blinking in red, blue and white.
Temperature measuring:
The Motion Sensor measures ambient temperature every 5 min-
utes. if the measured temperature differs from previously reported
by at least 2°C (3.6°F), accessory reports it to your iOS device.
Battery level measuring:
The Motion Sensor measures battery level every 24 hours and reports
it to your iOS device. Additionally, if battery level is below 15%, the
accessory will report low level battery status to your iOS device.
Light intensity measuring:
The Motion Sensor measures light intensity. if the measured light in-
tensity differs from previously reported by at least 200 lux, accessory
reports it to your iOS device.
PIR sensor malfunction detection (Fault Code 1):
The Motion Sensor detects malfunction of PiR sensor (responsible for
motion detection) and reports it to your iOS device.
Getting Fault Code 1 warning means that the accessory is damaged
and should be returned to the distributor for the warranty (if still valid).