FIBARO FGPB-101 운영 매뉴얼 - 페이지 7

{카테고리_이름} FIBARO FGPB-101에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. FIBARO FGPB-101 15 페이지. Fibaro button
FIBARO FGPB-101에 대해서도 마찬가지입니다: 사용 설명서 (6 페이지), 운영 매뉴얼 (15 페이지), 운영 매뉴얼 (8 페이지)

페이지 인쇄

#4: Operating the device

Operating the Button:

1 click:

send action to associated devices (switch on/off by de-

fault) and/or trigger a scene

2 clicks:

send action to associated devices (switch on maximum

level by default) and/or trigger a scene

3 clicks:

send action to associated devices (no action by default)

and/or trigger a scene

4 clicks:

wake the device up and/or trigger a scene

5 clicks:

start reset procedure (press and hold for 5s to confirm)

and/or trigger a scene

6 or more

learning mode (adding/removing)

clicks:

Hold:

send action to associated devices (start level change up/

down) and/or trigger a scene

Release:

send action to associated devices (stop level change)

and/or trigger a scene

Waking up the device:

The Button needs to be woken up to receive information about the

new configuration from the controller, like parameters and associa-

tions.

Click the Button 4 times to wake it up.

Scene ID:

Every

action

with

Button is send to the main

controller with Scene ID

equal to 1. Controller recog-

nizes type of action using the

attribute assigned to it.

Reset procedure of the Button:

Reset procedure allows to restore the device back to its factory set-

tings, which means all information about the Z-Wave controller and

user configuration will be deleted. In order to reset the device:

1. Click the Button exactly five times.

2. Press and hold the Button for at least 5 seconds.

Action

the

1 click

2 clicks

3 clicks

4 clicks

5 clicks

hold

Release

Attribute

Key Pressed 1 time

Key Pressed 2 times

Key Pressed 3 times

Key Pressed 4 times

Key Pressed 5 times

Key held Down

Key Released

OPERATInG ThE DEvICE