FIBARO FGPB-101-5 운영 매뉴얼 - 페이지 5

{카테고리_이름} FIBARO FGPB-101-5에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. FIBARO FGPB-101-5 15 페이지. Fibaro button

#2: Basic activation

1. Press and turn the button counter-clockwise to open the casing.

2. Remove the paper strip underneath the battery.

3. Press and turn the button clockwise to close the casing.

4. Place the device within the direct range of your Z-Wave controller.

5. Set the main controller in (security/non-security) add mode (see

the controller's manual).

6. Click the button 6 times at least.

7. Wait for the device to be added into the system, successful adding

will be confirmed by the controller.

8. Install the device in desired location using the attached

self-adhesive pad.

9. Click the button 4 times to wake it up.

BASIC ACTIvATIOn