Crestron TPS-4500IMPC 운영 매뉴얼 - 페이지 8
{카테고리_이름} Crestron TPS-4500IMPC에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Crestron TPS-4500IMPC 16 페이지. Crestron tps-4500impc touchpanel: operations guide
페이지 인쇄
Interface Module
CAUTION: If power is provided to the TPS-4500IMPC from the
+24VDC on a Cresnet connector or the PW-2420RU, power must not be
applied to the power input on the touchpanel base.
NOTE: When power is supplied through this connector, Crestron
recommends disconnecting the +24 VDC on the Cresnet connector (if it
is connected).
NOTE: Use care in wiring installations to avoid applying 24 VDC power
to Cresnet wiring from multiple sources.
NET/VIDEO (To Panel)
NET/
This 10-pin RJ-45 connection mates with the TPS-4500 or TPS-4500V
VIDEO
touchpanel. Refer to the descriptions and pinout table that follow this
1
paragraph. The 10-pin net/video cable assembly to connect the
touchpanel to the TPS-4500IMPC is supplied.
This port provides the Cresnet connection to the touchpanel. This port
also provides composite or S-video input for the built-in video card (with
the purchase of a TPS-4500V or installation of the TPS-VID-1/2 in a
TPS-4500 touchpanel). Consult the latest revision of the TPS-4500V &
4500LV Operations Guide (Doc. 6160), TPS-4500 & 4500L Operations
Guide (Doc. 5891), or TPS-VID-1/2 Operations & Installation Guide
(Doc. 6059) for details.
NET/VIDEO Pinouts
TYPE
10-pin RJ-45
Pin 1
To determine the location of pin 1, hold the cable so that the end of the
10-pin RJ-45 connector is facing away from you, with the clip side down
and the copper side up. The copper connector on the far left is pin 1.
4 • Interface Module: TPS-4500IMPC
PIN DESIGNATION
1
+24V
2
GND
Pin 1
3
C+
4
C-
5
Y
6
Z
7
Y+
8
Y-
9
GND
10
+24V
Crestron TPS-4500IMPC
DESCRIPTION
Power (Network)
Ground (Network)
Chrominance (Positive) /Composite 2
Chrominance (Negative) /Composite 2
Data (Network)
Data (Network)
Luminance (Positive)/Composite 1
Luminance (Negative)/Composite 1
Ground (Network)
Power (Network)
Operations Guide - DOC. 6163