Cisco Catalyst 3560-CX 매뉴얼 - 페이지 16

{카테고리_이름} Cisco Catalyst 3560-CX에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Catalyst 3560-CX 24 페이지. Managing switch stacks
Cisco Catalyst 3560-CX에 대해서도 마찬가지입니다: 제품 개요 (15 페이지), 매뉴얼 (27 페이지)

페이지 인쇄

Provisioning a New Member for a Switch Stack

Step 3

Step 4

Provisioning a New Member for a Switch Stack

This optional task is available only from the stack master.

Procedure

Step 1

Step 2

Step 3

Managing Switch Stacks

Command or Action

Switch# switch 3 priority 2

show switch stack-member-number

Example:

Switch# show switch

copy running-config startup-config

Example:

Switch# copy running-config

startup-config

Command or Action

show switch

Example:

Switch# show switch

configure terminal

Example:

Switch#

configure terminal

switch stack-member-number provision type

Example:

Switch(config)# switch 3 provision

WS-xxxx

Managing Switch Stacks

Purpose

You can display the current priority value by

using the show switch user EXEC command.

The new priority value takes effect immediately

but does not affect the current stack master. The

new priority value helps determine which stack

member is elected as the new stack master when

the current stack master or switch stack resets.

Verify the stack member priority value.

(Optional) Saves your entries in the

configuration file.

Purpose

Displays summary information about the switch

stack.

Enters global configuration mode.

Specifies the stack member number for the

preconfigured switch. By default, no switches

are provisioned.

For stack-member-number, the range is 1 to 8.

Specify a stack member number that is not

already used in the switch stack. See Step 1.

For type, enter the model number of a supported

switch that is listed in the command-line help

strings.