Digisol DG-GS1510HPEV2 하드웨어 설치 매뉴얼 - 페이지 8
{카테고리_이름} Digisol DG-GS1510HPEV2에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digisol DG-GS1510HPEV2 15 페이지.
페이지 인쇄
This section explains the detail of POE Switch installation:
Warning:
Only qualified mechanics are allowed to install or replace the device.
Installation tools and devices
Tools and devices needed for POE switch are optional devices. Users have to buy
according to their needs. The following tools and devices are typical for POE switch:
Switch Case Installation
Switches can be place on the table, mounting or other surfaces. To install your network
correctly, follow the steps in this section. The content includes:
Install on the desk
POE Switch can be placed on a smooth and safe desk.
Note:
Do not press on the switch. Any pressure more than 4.5kg may cause damage to switch.
Install on the mounting
Switches are mounted on the mounting with brackets.Fixed the mounting and the
switches face the front. Operate follows:
Mount the switch after the brackets are fixed. Refer to the following illustration:
-
screw driver
static ring
screws
Ethernet Cable
other Ethernet terminal devices
console terminal
Hardware Installation Guide
Installing switch
- 6