FIBARO FGBWHWPE-102 운영 매뉴얼 - 페이지 4

{카테고리_이름} FIBARO FGBWHWPE-102에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. FIBARO FGBWHWPE-102 11 페이지. Wall plug

NOTE

Remember to keep

your HomeKit Setup

Code in safe place. You

may need it in case of

re-pairing.

Backup Setup Code is

printed on the label

of the accessory, but

requires entering it

manually.

PAiRinG THe ACCeSSORY

#2: Pairing the accessory

1. Open the Settings app on your iOS device.

2. Go to the Wi-Fi section, turn the Wi-Fi on and connect to your pre-

ferred Wi-Fi network.

3. Go to the Bluetooth® section, and turn the Bluetooth® on.

4. Plug the Wall Plug into an electrical socket.

5. The LeD ring will be flashing yellow when ready for configuration.

6. Open a HomeKit compatible app of your choosing on your iOS

device.

7. Open pairing window in your HomeKit app to detect available

accessories.

8. Choose Wall Plug you wish to pair.

9. When prompted, allow the Wall Plug to connect to your Wi-Fi

network.

10. Wait until the LeD ring starts flashing violet.

11. You can identify it - Wall Plug will triple blink blue 3 times.

12. Find HomeKit Setup Code on the last page of Quick Start Guide

included in the box that looks like this:

XXX-XX-XXX

13. Start pairing with your HomeKit app.

14. Point your iOS device's camera at the Setup Code to scan it or en-

ter the Setup Code manually.

15. if entered Setup Code is valid, the device will complete the setup

process.

16. Follow instructions displayed in the application.