Digisol DG-GS4628E2 설치 매뉴얼 - 페이지 15

{카테고리_이름} Digisol DG-GS4628E2에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digisol DG-GS4628E2 19 페이지. Giga layer 2 switches

페이지 인쇄
Digisol DG-GS4628E2 설치 매뉴얼
good air circulation.
Caution!
The brackets are used to fix the switch on the rack. They can't serve as a bearing.
Please place a rack shelf under the switch. Do not place anything on top of the switch. Do
not block the blowholes on the switch to ensure the proper operation of the switch.

2.3.2 Connecting Console

DG-GS4200 series provide a RJ45 serial console port.
The connection procedure is listed below:
1.
Find the console cable provided in the accessory kit. Attach the RJ45 end to console
port of the switch.
2.
Connect the other side of the console cable to a character terminal (PC).
3.
Power on the switch and the character terminal. Configure the switch through the
Fig 2-2 Fasten the Switch to the Rack
Fig 2-3 Connecting Console to switch
2-7
DG-GS4200 Installation Guide