Digisol RANGER SERIES 빠른 설치 매뉴얼 - 페이지 10
{카테고리_이름} Digisol RANGER SERIES에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digisol RANGER SERIES 12 페이지. 2.4ghz ge outdoor access point with poe
Digisol RANGER SERIES에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (16 페이지)
페이지 인쇄
Press OK.
Type ipconfig to get the IP of default gateway.
Type "ping 192.168.123.254". Assure that you ping the correct IP
Address assigned to the load balancing Router. It will show four
replies if you ping correctly.
Ensure that your Ethernet Adapter is working, and that all network
drivers are installed properly. Network adapter names will vary
depending on your specific adapter. The installation steps listed
below are applicable for all network adapters.
Go to Start > Right click on "My Computer" > Properties.
Select the Hardware Tab.
Click Device Manager.
Double-click on "Network Adapters".
Right-click on Wired Card bus Adapter or your specific network
adapter.
Select Properties to ensure that all drivers are installed properly.
Look under Device Status to see if the device is working properly.
Click "OK".
10