FIBARO FGMS-001 운영 매뉴얼 - 페이지 3
{카테고리_이름} FIBARO FGMS-001에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. FIBARO FGMS-001 11 페이지. Motion sensor
FIBARO FGMS-001에 대해서도 마찬가지입니다: 운영 매뉴얼 (20 페이지), 운영 매뉴얼 (2 페이지)
페이지 인쇄
4
#1: Description and features
FIBARO Motion Sensor is a universal Z-Wave multi-sensor. Along
with detecting motion the device measures the temperature and
light intensity. The sensor has a built-in accelerometer to detect any
tampering of the device. FIBARO Motion Sensor is battery powered
device and designed to be installed quickly and easily on any surface.
The LED indicator signals motion, temperature level, operating
mode and can be used to see if device is within the Z-Wave network.
The motion sensor can be used for lighting scenes and presence
monitoring systems.
i
Main features of FIBARO Motion Sensor:
NOTE
•
compatible with any Z-Wave or Z-Wave+ Controller
This device may be
used with all devices
•
supports protected mode (Z-Wave network security mode) with AES-
certified with Z-Wave
128 encryption
Plus certificate and
•
detects motion using a passive IR sensor
should be compatible
with such devices pro-
•
measures ambient temperature
duced by other manu-
facturers.
•
measures light intensity
•
detects vibrations
•
extremely easy installation
i
NOTE
•
may be installed anywhere - wall or any surface
FIBARO Motion Sensor
•
battery powered
is a Security Enabled
•
theft and tampering protection - once vibrations are detected, the
Z-Wave Plus product
notification is sent to the main controller
and a Security Ena-
bled Z-Wave Control-
•
detected movement, temperature and vibrations are signalled by
ler must be used in or-
the built-in LED diode
der to fully utilize the
product.
DESCRIPTIOn AnD FEATuRES
FIBARO Motion Sensor is a fully
compatible Z-Wave PLUS device.
#2: Basic activation
1. Turn the cover counter-clockwise and open it.
2. Remove the battery blocker.
3. Add the device (see "Adding/removing the device" on page 6).
4. Wake up the sensor by triple clicking the B-button.
B-button
5. Close the cover and turn it clockwise.
6. Install the device (see "Physical installation" on page 7).
5
BASIC ACTIvATIOn