Digisol DG-CH1130 빠른 설치 매뉴얼 - 페이지 14

{카테고리_이름} Digisol DG-CH1130에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digisol DG-CH1130 16 페이지. Dvr series 8 channel ahd mini digital video recorder

Following are the solutions to problems that may occur during the installation and operation of the

Digisol DG-CH1130.

1) The DVR cannot boot up normally.

The power supply is not correct.

Switch power supply line is not in good connection/damaged.

The program updation is wrong.

The hard disk is damaged or the hard disk lines are broken.

The front panel is damaged.

The main board of the DVR is damaged.

2) The DVR reboots automatically or stops working after boot up.

The input voltage is not stable or too low.

The hard disk is damaged or the hard disk lines are broken.

The power of the switch power supply is low.

Video signal is not stable.

Bad heat radiator or too much dust or bad running circumstance for the DVR.

The hardware of the DVR is damaged.

3) System cannot detect the hard disk.

The hard disk power supply line is not connected.

The cables of the hard disk are damaged.

The hard disk is damaged.

The SATA port of main board is damaged.

This product comes with Two Years warranty. For further details about warranty

policy and Product Registration, please visit support section of