Sharp Carousel R-1870 서비스 매뉴얼 부록 - 페이지 5

{카테고리_이름} Sharp Carousel R-1870에 대한 서비스 매뉴얼 부록을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Carousel R-1870 24 페이지. Over the range microwave oven
Sharp Carousel R-1870에 대해서도 마찬가지입니다: 운영 매뉴얼 (32 페이지), 브로셔 및 사양 (8 페이지)

Sharp Carousel R-1870 서비스 매뉴얼 부록
SERVICE MANUAL
MICROWAVE OVEN
This Manual has been prepared to provide Sharp Electronics Corp.
Service Personnel with Operation and Service Information for the SHARP
MICROWAVE OVEN, R-1870 and R-1871.
The models R-1870 and R-1871 are quite similar to base model R-1850
(Ref.#
S6804R1850X//)
It is recommended that service personnel carefully study the entire text
of this manual and the base model's manual so that they will be qualified
to render satisfactory customer service.
Check the interlock switches and the door seal carefully. Special
attention should be given to avoid electrical shock and microwave
radiation hazard.
Never operate the oven until the following points are ensured:
(A) The door is tightly closed.
(B) The door brackets and hinges are not defective.
(C) The door packing is not damaged.
(D) The door is not deformed or warped.
(E) There is no other visible damage with the oven.
Servicing and repair work must be carried out only by trained service
personnel.
Certain initial parts are intentionally not grounded and present
a risk of electrical shock only during servicing. Service person-
nel - Do not contact the following parts while the appliance is
energized;
High Voltage Capacitor, Power Transformer, Magnetron, High
Voltage Rectifier Assembly, High Voltage Harness;
If provided, Vent Hood, Fan assembly, Cooling Fan Motor.
All the parts marked "*" on parts list are used at voltages more than
250V.
Removal of the outer wrap gives access to voltage above 250V.
SHARP ELECTRONICS CORPORATION
SHARP PLAZA, MAHWAH,
NEW JERSEY 07430-2135
R-1870/R1871
FOREWORD
WARNING
DANGER
PRODUCT DESCRIPTION

GENERAL INFORMATION

OPERATION
TROUBLESHOOTING GUIDE AND
TEST PROCEDURE
TOUCH CONTROL PANEL
COMPONENT REPLACEMENT
AND ADJUSTMENT PROCEDURE
WIRING DIAGRAM
PARTS LIST
3
R - 1 8 7 0
R - 1 8 7 1