Sharp Carousel R-1874 설치 지침 매뉴얼 - 페이지 7

{카테고리_이름} Sharp Carousel R-1874에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Carousel R-1874 8 페이지. Over-the-range microwave oven/hood system
Sharp Carousel R-1874에 대해서도 마찬가지입니다: 운영 매뉴얼 (32 페이지), 브로셔 및 사양 (8 페이지), 브로셔 및 사양 (5 페이지), 추가 서비스 매뉴얼 (20 페이지), 운영 매뉴얼 (32 페이지)

페이지 인쇄

4. Thread the power supply cord through the hole made in the bot-

tom of the top cabinet.

5. Hang the oven on the lower edge of the mounting plate. Rotate the

unit upward. See Figure 22. Take care that the power cord is able

to clear the edge of the hole as the oven is rotated upward. (In the

case of a non-recessed bottom in the top cabinet, the hole for the

cord may need to be enlarged.) Remove the carton portions.

6. Tighten the two unit mounting screws located in the grease filter

openings. See Figure 23.

7. Install grease filters by fitting into the opening. Push back and up

into place. See Figure 24.

8. Use the two Top Cabinet Screws (D) and two Flat Washers (E),

supplied in the INSTALLATION HARDWARE, to attach the unit to

the top cabinet. See Figure 25.

9. Make a bundle of the power supply cord and place it inside the

cabinet.

Unit mounting

screw

Figure 23

Figure 25

Grease filter

Figure 24

Grommet (for metal

cabinet only)

(D)

(E)

Hang at these

locations

(A)

Figure 22