Sharp Carousel R-230H 운영 매뉴얼 - 페이지 18

{카테고리_이름} Sharp Carousel R-230H에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Carousel R-230H 25 페이지. Operation manual
Sharp Carousel R-230H에 대해서도 마찬가지입니다: 운영 매뉴얼 (24 페이지)

페이지 인쇄

Disconnect the power cord before cleaning or

leave the door open to inactivate the oven dur-

ing cleaning.

Exterior

The outside surface is painted.

Clean the outside with

mild soap and water; rinse and dry with a soft cloth. Do

not use any type of household

or abrasive

cleaner.

Door

Wipe the window on both sides with a damp cloth to

remove any spills or spatters. Metal parts will be easier

to maintain if wiped frequently with a damp cloth. Avoid

the use of spray and other harsh cleaners

as they may

stain, streak or dull the door surface.

Touch

ContFol

Panel

Wipe the panel with a cloth dampened slightly with water

only. Dry with a soft cloth. Do not scrub or use any sort

of chemical

cleaners.

Close door and touch

STOP/

CLEAR pad.

Interior

Cleaning is easy because little heat is generated to the

interior surfaces; therefore, there is no baking and setting

of spills or spattering. To clean the interior surfaces, wipe

with a soft cloth and warm water. DO NOT USE ABRA-

SIVE OR HARSH CLEANERS OR SCOURING PADS. For

heavier soil, use baking soda or a mild soap; rinse thor-

oughly with hot water. NEVER SPRAY OVEN CLEANERS

DIRECTLY ONTO ANY PART OF THE OVEN.

Waveguide

Cover

The waveguide cover is made from mica so requires

special care. Keep the waveguide cover clean to as-

sure good oven performance. Carefully wipe with a

damp cloth any food spatters from the surface of the

cover immediately after they occur. Built-up splashes

may overheat and cause smoke or possibly catch fire.

Do not remove the waveguide cover.

Odor

Re.oval

Occasionally, a cooking odor may remain in the oven.

To remove, combine 1 cup water, grated peel and juice

of 1 lemon and several whole cloves in a 2-cup glass

measuring cup. Boil for several minutes using 100%

power. Allow to set in oven until cool. Wipe interior with

a soft cloth.

Turntable/Turntable

Support

The turntable

and turntable

support can be removed

for easy cleaning. Wash them in mild, sudsy water; for

stubborn

stains use a mild cleanser

and a non-abra-

sive scouring sponge. They are also dishwasher-proof.

The turntable

motor shaft is not sealed, so excess wa-

ter or spills should be wiped up immediately.

Exterior

Turntable

Support