Sharp Carousel RK49S27 설치 지침 - 페이지 2
{카테고리_이름} Sharp Carousel RK49S27에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Carousel RK49S27 4 페이지. Built-in kit
페이지 인쇄
STEP 1 CABINET OR WALL OPENING
The opening in the wall or cabinet must be within the
following dimensions:
Cut Out
RK49S27
1
Height (A)
14
/
" to 15
2
11
Width (B)
24
/
" to 25
16
Minimum
20"
Depth (C)
Outlet should NOT be in the shaded area as indicated on
Sketch 1.
A
B
SKETCH 1
RK49S30
3
1
3
/
"
14
/
" to 15
/
4
2
4
5
13
3
/
"
24
/
" to 26
16
16
20"
C
NOTES
• Please allow minimum 3" wood gap between the
microwave oven cutout and the appliance cutout below
the microwave oven. See Sketch 2
"
/
"
4
• If the dimension of DEPTH (C) is more than 21", the outlet
location may be any area on the rear wall.
• The floor of the opening should be constructed of plywood
strong enough to support the weight of the oven and floor
load (about 100 pounds). The floor should be level and
90˚ with the face of the cabinet for proper installation and
operation of the oven. Be sure to check the local building
code as it may require that the opening be enclosed with
sides, ceiling and rear partition. The proper functioning of
the oven does not require the enclosure.
2
Microwave cutout
3" Min.
Wall oven cutout
SKETCH 2