Crestron UC-MM30-T 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} Crestron UC-MM30-T에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Crestron UC-MM30-T 8 페이지. Flex tabletop small room video conference system for microsoft teams rooms
Crestron UC-MM30-T에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (11 페이지)

페이지 인쇄

UC-MM30-T and UC-MM30-T-I

Crestron Flex Tabletop Small Room Video Conference System for Microsoft Teams® Rooms Systems

4. Bundle the cables with the integrated cable tie wraps. The cable tie

wraps are reusable.

5. After completing the connections, secure the connector cover using a

#1 Phillips head screwdriver to replace the screw.

Configure

Apply Power

Press the power button on the bottom of the UC Engine and apply power

to all of the other devices in the system.

Configure the Conference Device

1. On a computer, open a web browser to the IP address found in the

conference device's settings.

NOTES:

The device and computer must be on the same network switch

and VLAN.

A login with administrative rights for the device is required.

2. Log in to the device and navigate to DEVICE > Applications.

3. Enter the following information in the appropriate fields:

Teams Video PC Address: Enter the IP address or hostname of the

UC Engine.

NOTE:

The hostname is printed on a label affixed to the UC

Engine.

Teams Video PC Port: By default, port number 49500 is used. If a

different port number has been configured on the UC Engine, enter

that port number instead.

Teams Video Username: Enter the login username for the UC

Engine. (The default username is "admin".)

Teams Video Password: Enter the login password for the UC

Engine. (The default password is "sfb".)

4. Click Save Changes.

Configure the System

Use the conference device and your Microsoft Teams or Skype account

credentials to configure the UC Engine. Refer to the

Video Conference Systems

(Doc. 8360) for more information.

Quick Start

Crestron Flex UC