Sharp Aquos 운영 매뉴얼 - 페이지 16
{카테고리_이름} Sharp Aquos에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Aquos 35 페이지. Led backlight tv / monitor
Sharp Aquos에 대해서도 마찬가지입니다: 사용자 설명서 (30 페이지), 운영 매뉴얼 (41 페이지), 운영 매뉴얼 (37 페이지)
페이지 인쇄
<<
Connection/External Devices
Chromecast built-in™ compatible devices
When you connect a device such as a Chromecast built-in compatible
smartphone or tablet to this TV, you can enjoy video and audio from the
device on the TV's large screen and speakers.
NOTE
When the TV is turned off or the connection is ended on the device, you
must connect the device again.
For details about the operation of the Chromecast built-in compatible
device, check the manual for that device.
Audio Devices
HDMI Input
eARC (Enhanced Audio Return Channel)
Refer to "
(HOME)" > "Settings" > "Device Preferences" > "Sound" >
"eARC".
You can select to listen to the TV sound only from the LINK-compatible audio
system.
Auto
Off
Inputs
Refer to "
(HOME)" > "Settings" > "Device Preferences" > "Inputs".
Change the label for an input terminal, and switch between HDMI CEC
Control Settings.
Digital Audio Output
Refer to "
(HOME)" > "Settings" > "Device Preferences" > "Sound" >
"Digital Audio Output".
This function allows you to select the digital audio signal type.
Auto
Bypass
PCM
Dolby Digital Plus
Dolby Digital
Bluetooth setup
This feature enable a TV to connect with other Bluetooth devices via
Bluetooth connection.
NOTE
When you use the Bluetooth device with your TV for the first time, you
must make pairing between the device and the TV. Once the pairing is
correctly carried out, the Bluetooth device will be registered on the TV.
Connectivity and reception range may depend on condition, environment,
and distance of Bluetooth devices.
Sound quality and compatibility are depending on Bluetooth devices.
The Bluetooth format only supports HID, A2DP and AVRCP.
Bluetooth devices
You can add, delete or select Bluetooth devices.
Connection/Selection Procedure
1 Turn the Bluetooth device on and put it in pairing mode.
To put your Bluetooth device in pairing mode, refer to the operation
manual of the device.
2 Refer to "
(HOME)" > "Settings" > "Remotes & accessories" > "Add
accessory" to put the TV in pairing mode.
A list of available Bluetooth device will be displayed.
3 Select the desired device from the list, then follow the on screen display
instruction.
If you are prompted to enter a password, refer to the operation manual of
the device.
After pairing is completed, the device connects to the TV.
NOTE
To pair the remote control unit with the TV, please hold CH
10 seconds. Wait for about 1 minute before pairing.
EN 3-4
>>
and
for