Sharp Aquos 운영 매뉴얼 - 페이지 17

{카테고리_이름} Sharp Aquos에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Aquos 37 페이지. Led backlight tv / monitor
Sharp Aquos에 대해서도 마찬가지입니다: 사용자 설명서 (30 페이지), 운영 매뉴얼 (41 페이지), 운영 매뉴얼 (35 페이지)

페이지 인쇄
Sharp Aquos 운영 매뉴얼
<<
Connection/External Devices

Bluetooth setup

This feature enable a TV to connect with other Bluetooth devices via
Bluetooth connection.
NOTE
When you use the Bluetooth device with your TV for the first time, you
must make pairing between the device and the TV. Once the pairing is
correctly carried out, the Bluetooth device will be registered on the TV.
Connectivity and reception range may depend on condition, environment,
and distance of Bluetooth devices.
Sound quality and compatibility are depending on Bluetooth devices.
The Bluetooth Profile only supports HID, A2DP and AVRCP.
Bluetooth devices
You can add, delete or select Bluetooth devices.
Connection/Selection Procedure
1 Turn the Bluetooth device on and put it in pairing mode.
To put your Bluetooth device in pairing mode, refer to the operation
manual of the device.
2 Press "
(Dashboard)".
Select "Settings" > "Remotes & Accessories" > "Pair accessory" to put
the TV in pairing mode.
A list of available Bluetooth device will be displayed.
3 Select the desired device from the list, then follow the on screen display
instruction.
If you are prompted to enter a password, refer to the operation manual of
the device.
After pairing is completed, the device connects to the TV.
NOTE
To pair the remote control unit with the TV, please hold
button for 10 seconds. Wait for about 1 minute before pairing.
NOTE
When there is significant interference in the 2.4-GHz frequency (such as
from other wireless LAN devices, Bluetooth
telephones, and microwave ovens), to prevent mutual interference, please
turn off the power off unused devices.
(HOME) and
EN 3-5
>>
®
devices, 2.4-GHz cordless