Sharp AQUOS LB-1085 운영 매뉴얼 - 페이지 17
{카테고리_이름} Sharp AQUOS LB-1085에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AQUOS LB-1085 36 페이지. 108' class lcd monitor
Sharp AQUOS LB-1085에 대해서도 마찬가지입니다: 사용자 설명서 (32 페이지), 브로셔 및 사양 (17 페이지), 매뉴얼 (7 페이지)
페이지 인쇄
Preparation
When using DVI Cable (INPUT 7):
Blu-ray disc player/DVD player
•
To enjoy 1080p display capability, connect your external equipment using a component or DVI cable and set the
equipment to 1080p output.
Using Digital Audio Output
It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. PCM audio outputs from the
terminal.
To optical digital input of
external audio devices
•
Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI
connection. In this case, set the audio formats of the connected equipment to PCM, 32/44.1/48 kHz.
Connecting HDMI Equipment
You can use the INPUT 4, INPUT 5 or INPUT 6 terminal when connecting HDMI equipment.
HDMI equipment
•
When using an HDMI-DVI conversion cable, input the audio signal to the AUDIO terminal of INPUT 6.
•
To enjoy 1080p display capability, connect your Blu-ray disc player or other external equipment using an HDMI-
certified cable and set the equipment to 1080p output.
*
Use a commercially-available HDMI cable complying with HDMI standards. Using a non-standard cable will not
function normally, resulting in video not being shown or sound not being produced.
*
Set the player not to use the HDMI CEC function such as AQUOS LINK. Using the HDMI CEC function may cause
malfunction.
DVI cable
(commercially available)
Ø 3.5 mm stereo minijack cable
(commercially available)
Optical fiber cable
(commercially available)
HDMI-certified cable*
(commercially available)
15