Sharp Aquos LC 20D30U 운영 매뉴얼 - 페이지 20
{카테고리_이름} Sharp Aquos LC 20D30U에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Aquos LC 20D30U 45 페이지. Sharp lcd color television lc-20d30u operation manual
페이지 인쇄
Basic Operation (Continued)
Switching the Input Modes (INPUT1/
INPUT2/INPUT3/INPUT4/INPUT5(PC)/TV)
1
Turn on the power of the connected video equipment.
2
Press INPUT to select the applicable input source. The
screen changes in order of INPUT1, INPUT2, INPUT3,
INPUT4, INPUT5 (PC) and TV mode each time INPUT
is pressed.
INPUT1 mode
INPUT2 mode
INPUT3 mode
INPUT4 mode
INPUT5 ( PC ) mode
TV mode
A
• INPUT1:
Used for video equipment connected to the COMPONENT
input terminals.
• INPUT2:
Used for video equipment connected to the INPUT2
terminals.
The S-video input terminal is additionally provided for the
INPUT2 terminal. If both the S-video terminal and normal
video terminals are connected with cables, the S-video
input terminal takes priority.
• INPUT3/OUTPUT:
INPUT3 mode is used to adjust the preset settings and IN
or OUT can be selected. INPUT3 indication is not displayed
when OUT is selected. (For details on setting INPUT3
SELECT, see page 26.)
• INPUT4:
Used for video equipment connected to the HDMI input
terminal.
• INPUT5:
If you connect the PC to the PC-IN terminals, you can view
the PC image on the LCD TV set.
18
I N P U T 1
7 2 0 P
I N P U T 2
I N P U T 3
I N P U T 4
H D M I
7 2 0 P
I N P U T 5
P C
2
Sound Volume
■ To adjust the volume
+
● Press VOL (
) to increase the sound volume.
The bar indicator shifts right.
VOLUME
��50
–
● Press VOL (
) to decrease the sound volume.
The bar indicator shifts left.
VOLUME
10
■ To mute the sound
● Press MUTE to temporarily turn off the sound.
The MUTE mark
is displayed for 4 seconds.
+
● Press MUTE or VOL (
)/(
the previous level.
The mute function is automatically turned off when any
of the following buttons are pressed: POWER, MUTE,
+
–
VOL(
)/(
) or MTS.
VOLUME
10
A
+
–
• When VOL (
)/(
) is pressed in the Mute mode, the sound turns
on and the volume indicator is displayed.
• The Mute function is canceled when POWER is pressed.
■ To select MTS (Multichannel TV Sound)
1
Press MTS to display the MTS screen.
2
Press MTS to select the MTS settings.
STEREO: stereo audio
SAP:
secondary audio program
MONO:
monophonic audio
<ON�AIR
STEREO
<ON�AIR
SAP
MONO
A
• "ON AIR" appears when a STEREO or SAP broadcast is being
aired.
–
) to turn the sound back to