Sharp Aquos LC 20S4U 운영 매뉴얼 - 페이지 29
{카테고리_이름} Sharp Aquos LC 20S4U에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Aquos LC 20S4U 45 페이지. Sharp operation manual liquid crystal television lc-20s4u
Sharp Aquos LC 20S4U에 대해서도 마찬가지입니다: 운영 매뉴얼 (43 페이지)
페이지 인쇄
Useful Features (Continued)
11111111
Input the 4-digit secret number by using Channel
Select; the V-CHIP select mode will be displayed.
Set the V-CHIP BLOCK again.
Upper control panel of the main unit
MENU
Press MENU to exit.
Repeat steps 1 to 3 of Setting V-CHIP (MPAA rating)
(see page 27), or 1 and 2 of Canceling the V-CHIP
BLOCK screen while V-CHIP BLOCK is activated
then "INPUT SECRET NO." will be displayed.
'
Press and hold both CH (A) and VOL (+) on the main
unit simultaneously until the message "INPUT SECRET
NO." blinks.
• Changing V-CHIP BLOCK settings
Repeat steps 1 to 3 of Setting V-CHIP (MPAA rating),
then "INPUT SECRET NO." will be displayed. (See
page 27.)
• Changing or clearing the SECRET NUMBER
If you forget the secret number, clear the secret number
as follows.
-- --- ---
@ill _
~
0 0 0
SLEEP
~
0
RETURN
8
MENU
o
~
_
AUDIO
MUTE
ONLY
CC
INPUT
0 0 0 0
Press
.iJ../'Y
to select "STATUS", and press ENTER.
"V-CHIP HAS BEEN ACTIVATED" appears if you watch
a program with the same Program Rating data you
configured.
V-CHIP
HAS
BEEN
ACTIVATED
TV - 14
DLSV
Press MENU to exit.
Repeat steps 1 to 4 of Setting V-CHIP (MPAA rating).
(See page 27.)
11111111
Input the 4-digit secret number by using Channel
~elect; ~-CHIP
BLOCK is temporarily canceled. If you
Input an Incorrect secret number, "SECRET NO. IS
INCORRECT" is displayed. In this case, input the
correct secret number.
Press MENU to display "INPUT SECRET NO.".
I
NOTE
>
• If "STATUS" is set to "OFF", V-CHIP BLOCK will not be
activated.
.
I
NOTE
>
• "V-CHIP HAS BEEN ACTIVATED" will not be displayed if
"STATUS" is set to "OFF".
•
Canceling the V-CHIP BLOCK screen while
V-CHIP BLOCK is activated
•
Activating V-CHIP BLOCK
• Setting STATUS
You can activate V-CHIP BLOCK after setting
MPAA rating or TV GUIDELINES.
28
@