Sharp Aquos LC 20S4U 운영 매뉴얼 - 페이지 36

{카테고리_이름} Sharp Aquos LC 20S4U에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Aquos LC 20S4U 45 페이지. Sharp operation manual liquid crystal television lc-20s4u
Sharp Aquos LC 20S4U에 대해서도 마찬가지입니다: 운영 매뉴얼 (43 페이지)

Sharp Aquos LC 20S4U 운영 매뉴얼
Connecting External Devices
You can enjoy picture and sound by connecting a VCR or a home video game system to the terminals located on the rear of
the main unit.
When connecting an external device, turn off the POWER of the main unit first to prevent any possible damage.
I
Example of External Devices that can be Connected
i
To INPUT2 terminal
To INPUT1 terminal
o
Digital TV tuner
*
If your external device has a
component terminal, COMPONENT
connection is recommended
(you can view high-quality pictures).
• Audio amplifier
<Example>
·VCR
• Laser disc player
<Example>
• DVD Player, etc.
To INPUT3/0UTPUT terminal
*
If your external device has an
S-video terminal, S-VIDEO
connection is recommended.
<Example>
• Camcorder
• Home video game system
I
NOTE
>
PC connection is not possible.
For the cable, use a commercially available audio/video cable.
Only connect audio/video signals to INPUT2 and INPUT3/0UTPUT terminals. Connecting other signals may result in a malfunction.
INPUT2 has 2 video input terminals: VIDEO and S-VIDEO. When you connect external devices to both terminals (and if you select
"INPUT2"), you can only view pictures from the S-VIDEO terminal. To view the picture from the VIDEO terminal, do not connect any
external device to the S-VIDEO terminal.
For more information about external device connections, see the manuals of your external devices.
I
Outputting Video and Audio (Video Output)
You can output video and audio signals from the TV set through the INPUT3/0UTPUT terminal.
• When using INPUT3/0UTPUT as an output terminal, select "SETUP" in the Menu and set "INPUT3 SELECT" to "OUT".
(See page 25.)
• The factory setting for "INPUT3 SELECT" is "IN".
I
NOTE
>
• The INPUT3/0UTPUT terminal has 2 output modes (see page 25).
• When using the S-VIDEO input for INPUT2, or Y, Ps or PR input for COMPONENT, no video output will be made to the AV output terminal,
but audio output will be made for connection to external audio systems.
@
35