Sharp Aquos LC-13S1M 운영 매뉴얼 - 페이지 18
{카테고리_이름} Sharp Aquos LC-13S1M에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Aquos LC-13S1M 41 페이지.
페이지 인쇄PRESET (Continued)
Presetting the Channels (MANUAL)
Upper control panel
4
3 1, 2, 6
2
PRESET
1
BRIGHT
TEXT
POWER
TV/ VIDEO
T
SUBPAGE REVEAL
HOLD
SUBPAGE
MENU
SUBTITLE
END
E
MENU
MENU
MPX
OK
SOUND
MENU
M
VOL(+)/(–)
VOL
CH
CH
CH (
CHANNEL
SELECT
TV/VIDEO
SLEEP
DIS.MODE
Upper control panel
4
1, 2, 3, 5
2
PRESET
1
I Setting a channel to a desired TV
station:
1
Press MENU (PRESET-1) on the
upper part of the LCD TV set for
more than 2 seconds. The AUTO
mode screen appears.
2
Press MENU (PRESET-1) to
display the MANUAL mode screen.
Press MENU (PRESET-1) again
to change the MANUAL mode as
shown below.
AUTO → MANUAL → LANGUAGE →
3
Select the channel position using
CHANNEL SELECT or CH (
(
).
4
Press VOL (+)/(–) to locate the
channel you want to preset to the
)/(
)
position. Search is initiated and
when a TV signal is received
during the search, the search
stops.
5
Repeat steps 3 and 4 above, to
preset the channel positions for
other broadcasts, etc.
6
Press MENU (PRESET-1) to
return to the normal screen.
Note:
• SYSTEM may not have been set correctly,
if noise can be heard or if there is no
sound.
In such case, reset to SOUND SYSTEM
using MENU.
I
In a weak reception area, or under
bad reception conditions.
1
Press MENU (PRESET-1) on the
upper part of the LCD TV set for
more than 2 seconds. The AUTO
mode screen appears.
2
Press MENU (PRESET-1) to
display the MANUAL mode screen.
3
While the MANUAL mode screen
is displayed, press MENU (PRE-
SET-1) for more than 2 seconds.
The channel position number
remains in green.
Note:
• While the MANUAL mode screen is
displayed, press MENU (PRESET-1).
(The LANGUAGE mode screen will
appear.)
4
Adjust for good reception using
VOL (+)/(–).
5
After finishing the adjustment,
press MENU (PRESET-1) to
continue channel presetting.
Sound System
NORMAL
Auto mode screen
SCREEN
)/
Manual mode screen
Channel position
ENGLISH
SELECT:
number
EXIT:
MENU
17