Sharp Aquos LC-19LE320E 운영 매뉴얼 - 페이지 14
{카테고리_이름} Sharp Aquos LC-19LE320E에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Aquos LC-19LE320E 32 페이지. Lcd colour television
Sharp Aquos LC-19LE320E에 대해서도 마찬가지입니다: (스페인어) 매뉴얼 드 마네호 (34 페이지)
페이지 인쇄
tV menu
Step 3: automatic channel scan
Your TV searches and stores all available digital and
analogue TV channels as well as all available digital
radio channels.
1�
menu on the remote control and select
Press
tV ≥ Channels�
note
•
You are prompted to enter current password to enter
Channels if Channel Block /parental Guidance /
input Block in the parental menu is not the default
setting.
2�
Select
Channel Scan and press oK or ≥
and select atV only or atV and DtV to start
channel installation. The installation may take a
few minutes.
3�
When complete, follow the on-screen
instructions to exit.
update Scan
E
update Scan has similar function with Channel Scan.
The difference is you could update channel list without
erasing the original information.
note
•
This function is for Antenna mode only.
1�
menu on the remote control and select
Press
tV ≥ Channels.
note
•
You are prompted to enter current password to enter
Channels if Channel Block /parental Guidance /
input Block in the parental menu is not the default
setting.
2�
<> to select update Scan and press
Press
oK or ≥ to start channel update.
3�
When complete, follow the on-screen
instructions to exit.
Single rF Scan
E
If using digital broadcasts, you can check the quality
and signal strength of digital channels. This allows you
to reposition and test your antenna or satellite dish.
1�
menu on the remote control and select
Press
tV ≥ Channels.
note
•
You are prompted to enter current password to enter
Channels if Channel Block /parental Guidance /
input Block in the parental menu is not the default
setting.
2�
Press
<> to select Single rF Scan and press
oK or ≥ to enter.
14
antenna mode
Menu
Picture
Scan single RF channel. (Digital Only)
Sound
TV
Features
RF Channel
Signal Strength
Parental
Signal Quality
Eco
OK
Scan
EXIT
Exit
Cable mode
Menu
Picture
Scan single RF channel. (Digital Only)
Sound
TV
Features
Frequency (KHz)
Modulation
Parental
Symbol Rate (Ksym/s)
Eco
Signal Strength
OK
Scan
EXIT
Exit
3�
<
antenna mode>
Highlight the rF Channel box, and press ≤≥
to select a channel number you prefer to scan.
<Cable mode>
Configure the Frequency, modulation, and
Symbol rate box to scan.
4�
oK to start scanning.
Press
5�
When the scan is completed, the result of
signal strength and signal quality appear on the
screen.
6�
Follow the on-screen instructions to exit.
note
•
If the signal quality and strength is poor, reposition the
antenna or satellite dish and retest.
•
If you have further problems with the reception of your
digital broadcast, contact a specialised installer.
analogue manual Scan
E
This section describes how to search and store
analogue TV channels manually.
1�
menu on the remote control and select
Press
tV ≥ Channels.
note
•
You are prompted to enter current password to enter
Channels if Channel Block /parental Guidance /
input Block in the parental menu is not the default
setting.
0 %
21
0
Poor
0 %
474000
Auto
6875
0