Sharp AQUOS LC-20B10N 운영 매뉴얼 - 페이지 11

{카테고리_이름} Sharp AQUOS LC-20B10N에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AQUOS LC-20B10N 29 페이지. Lcd colour television

Basic Operation

POWER indicator

● Press POWER. The POWER indicator instantly changes

from red to green and the LCD TV set is turned on.

On-screen display

NOTE

• The on-screen display disappears after a few seconds.

● To turn off the main power, press POWER again.

To turn off the LCD TV

Press POWER. The POWER indicator will turn red.

To turn the LCD TV back on

Press POWER again. The POWER indicator will turn green.

POWER

Turn on the power of the connected video equipment.

Press TV/VIDEO to select the applicable input source.

The screen changes in order of AV1, AV2, AV3 and TV

mode each time TV/VIDEO is pressed.

AV1 mode

AV2 mode

AV3 mode

TV mode

NOTE

• AV1 (COMPONENT):

Select this mode when viewing the signals from the video

equipment connected to the AV1 IN terminal.

• AV2: Select this mode when viewing the signals from the video

equipment connected to the AV2 IN terminal. The S-VIDEO

terminal is additionally provided for the AV2 IN terminal. If

both S-VIDEO terminal and VIDEO terminal are connected

with cables, the S-VIDEO terminal takes priority.

• AV3: Select this mode when viewing the signals from the video

equipment connected to the AV3 IN/OUT terminal. AV3

mode is used to adjust the preset settings and In or Out can

be selected. AV3 indication is not displayed when Out is

selected. (For details on setting "AV3 IN/OUT", see page 20.)