Sharp aquos LC-20S5E-BK 운영 매뉴얼 - 페이지 10
{카테고리_이름} Sharp aquos LC-20S5E-BK에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp aquos LC-20S5E-BK 24 페이지. Lcd-kleurentelevisie
Sharp aquos LC-20S5E-BK에 대해서도 마찬가지입니다: 운영 매뉴얼 (24 페이지), (네덜란드어) 사용 설명서 (24 페이지)
페이지 인쇄
Basic Operation
First Installation
When you turn on the LCD TV set for the first time, the
First Installation routine, which makes installation easier, is
activated. Using this routine, you can select the on-screen
display language and automatically search for and store all
the receivable TV channels.
NOTE
•
You can also execute the First Installation routine by selecting "First
installation" on the Setup Menu screen.
For selecting the menu items, see the right column.
Press
(MAIN POWER) on the LCD TV set.
•
The "First installation" screen with a list of the languages for the
on-screen display is displayed.
2
Press ▲/▼/◀/▶ to select the desired language, and press
OK.
3
Press ▲/▼ to select the desired item, and press ◀/▶ to make
the setting.
NOTE
•
You can change "Colour system" and "Sound system" only
when "Other count." is selected in "Country".
4
Press ▲/▼ to select "Start search", and press OK.
•
The automatic programme search begins.
5
Press END to exit.
NOTE
•
After the First installation routine, you can change the settings of
"Language" (page 11), and perform "Automatic search" (page 12)
again.
8
Selecting Menu Items
The menus can be used to adjust the various settings of your
LCD TV set.
For details on setting each menu item, refer to the page
number indicated below.
NOTE
•
The illustrations and on-screen displays in this manual are for
explanation purposes and may vary slightly from the actual
appearance.
•
"Programmes" or "First installation" cannot be set when the EXT1,
EXT2, EXT3 or PC mode is selected as an input mode.
•
Settings most recently adjusted will be saved in memory.
■ Using the remote control
Press MENU to display the Menu screen.
2
Press ◀/▶ to select the desired menu item.
•
The cursor moves left or right.
•
The cursor indicates the selected menu item.
3
Press ▲/▼ to select the desired item, and press ◀/▶ to adjust
the selected item.
4
Press MENU to return to the previous screen or END to return
to the normal screen.
The bar below is an operational guide for the remote
control. The bar will change in accordance with each
menu setting screen.