Sharp aquos LC-20S5E-BK 운영 매뉴얼 - 페이지 7
{카테고리_이름} Sharp aquos LC-20S5E-BK에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp aquos LC-20S5E-BK 24 페이지. Lcd-kleurentelevisie
Sharp aquos LC-20S5E-BK에 대해서도 마찬가지입니다: 운영 매뉴얼 (24 페이지), (네덜란드어) 사용 설명서 (24 페이지)
페이지 인쇄
Part Names of the Remote Control
Switches the LCD TV set power on or
Channel Select
TV input mode: Selects the channel.
This LCD TV set allows you to select
up to 99 channels (1 to 99).
Teletext mode: Selects the page.
(Flashback)
Switches the channels between the
currently tuned one and the previous
(Wide Mode) (P. 13)
Switches the Wide mode between
Auto, 4:3 and 16:9 modes.
Auto
4:3
(Sound) (P. 10)
Switches to the sound mode.
Right/Left Selection (P. 8)
(Teletext) (P. 15)
Displays the Teletext mode screen.
OK, Programme Table (P. 8,13)
Returns to normal screen.
Upwards/Downwards Selection (P. 8)
(Reveal) (P. 15)
Displays hidden information such as
solutions to riddles and puzzles.
(Hold) (P. 15)
Temporarily holds the current Teletext
Colour (Red/Green/Yellow/Blue) (P. 15)
TELETEXT: Select a page.
(Subtitle) (P. 15)
Displays the Teletext Subtitle directly.
(Subpage) (P. 15)
Displays the Teletext Subpage directly.
(Top/Bottom/Full) (P. 15)
Set the area of magnification in
Teletext mode.
MENU (P. 8)
Displays the TV menu.
Returns to the previous screen.
NOTE
•
There is a protective film covering the face of the remote control. Please remove this film before use.
(Power)
standby.
(P. 15)
one.
16:9
END (P. 8)
page.
BACKLIGHT (P. 9)
Switches the brightness of the display
between Bright, Medium and Dark.
Backlight : Bright
Backlight : Medium
Backlight : Dark
(Mute)
Switches the sound on and off.
S o u n d : O f f
S o u n d : O n
•
When
(+)/(–) is pressed in the
Mute mode, the sound turns on, and
the volume indicator is displayed.
•
The Mute function is cancelled when
is pressed.
(+)/(–) (Volume)
Changes the sound volume.
Volume
10
P (
)/(
) (Channel)
TV input mode: Selects the channel.
•
Channel "0" is reserved for RF output
of VCR.
•
Channels not set with "Automatic
search" or via "Setup" are set to be
skipped and therefore cannot be
displayed using P (
)/(
).
Teletext mode: Selects the page.
(P. 15)
(Input)
Switches the input source between
EXT1, EXT2, EXT3, PC and TV
modes.
Mode:
EXT1
EXT2
EXT1
EXT2
TV
PC
1 S- 6
PC
NOTE
•
EXT: Select this mode when viewing
the signals from the video equipment
connected to the EXT1 (21-pin Euro-
SCART) terminal.
•
EXT2: Select this mode when viewing
the signals from the decoder and other
audio-visual equipment connected
to the EXT2 (21-pin Euro-SCART)
terminal.
•
EXT3: Select this mode when viewing
the signals from the video equipment
connected to the EXT3 terminals using
the VIDEO or S-VIDEO terminal for
video input.
If both VIDEO and S-VIDEO terminals
are connected with cables, the S-
VIDEO input terminal is selected as the
high priority.
•
PC: Select this mode when viewing the
signals from the PC connected to the
PC terminals.
SLEEP (P. 13)
Set the sleep timer on (in units of 30
min. up to max. 2 hr.) and off.
(Display Information)
The status display appears by
pressing
.
EXT3
EXT3
5