Sharp AQUOS LC-26P55E 운영 매뉴얼 - 페이지 5

{카테고리_이름} Sharp AQUOS LC-26P55E에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AQUOS LC-26P55E 28 페이지. Aquos lcd colour television

Quick guide

Before performing work spread cushioning over the base area to lay the TV on, making sure the

area is completely flat. This will prevent it from being damaged.

Before attaching (or detaching) stand, unplug the AC cord from the AC INPUT terminal.

Confirm the 8 screws supplied with the TV.

Short screws (m4)

(used in step 2)

Insert the stand into the opening on the bottom of

the TV.

NOTE

• To detach the stand, perform the above steps in reverse order.

Standard DIN45325

plug (IEC 169-2)

75-ohm coaxial cable

Cable tie

Setting the TV on the wall

• Installing the LCD Colour TV requires special skill that should only be performed by qualified service personnel.

Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting

or mounting that results in accident or injury.

• You can ask a qualified service personnel about using an optional bracket to mount the TV to the wall.

Long screws (m4)

(used in step 4)

Ferrite Core

The Ferrite Core should be permanently attached

and never removed from the AC cord.

Attach the two parts of the stand unit to each other

using the 4 short screws as shown.

Insert and tighten the 4 long screws on the rear

of the TV as shown.

Ferrite Core

Place the TV close to the

AC outlet, and keep the

power plug within reach.

Product shape

varies in some

countries.

AC cord

Cable clamp