Sharp Aquos LC-32AX3X 운영 매뉴얼 - 페이지 36
{카테고리_이름} Sharp Aquos LC-32AX3X에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Aquos LC-32AX3X 50 페이지. Lcd colour television
페이지 인쇄
Useful adjustment settings
Audio Only
When listening to music from a music programme, you
can set the display off and enjoy audio only.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select "Audio Only", and then
press ENTER.
4
Press c/d to select "On", and then press
ENTER.
Selected item
On
Audio is output without screen image.
Off
Both screen images and audio are output.
NOTE
• When you make operations that change the picture on the
TV such as by changing the input source, the Audio Only
function is set to "Off".
DNR (Digital Noise Reduction)
Produces a clearer video image.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select "DNR", and then press
ENTER.
4
Press a/b to select the desired level, and
then press ENTER.
Description
Off
High
Low
HDMI Setup
HDMI (High-Definition Multimedia Interface) terminal
selection.
1
To watch an HDMI equipment image, select
"INPUT4" from "INPUT SOURCE" menu
using TV/VIDEO on the remote control unit
or on the TV.
2
Press MENU and the MENU screen displays.
3
Press c/d to select "Option".
4
Press a/b to select "HDMI Setup", and then
press ENTER.
• The HDMI Setup menu is displayed only when
"INPUT4" is selected from the INPUT SOURCE
menu.
[ Option ... HDMI Setup ]
MENU
Option
Audio Only
DNR
HDMI Setup
Quick Shoot
Demo
5
Press a/b to select the desired item or
setting, and then press ENTER.
HDMI Setup
Selectable items
items
Signal
RGB/YCbCr 4:4:4/
Type
YCbCr 4:2:2
Colour
ITU601/ITU709
Matrix
Dynamic
Normal/
Range
Enhanced
Auto View
Enable/Disable
Audio
Digital/Analogue
Select
NOTE
• Refer to your external equipment operation manual for
the signal type.
• Items under "Signal Type", "Colour Matrix", and "Dynamic
Range" can be selected when the equipment is connected
with a DVI-HDMI conversion cable.
• When the equipment is connected with an HDMI cable,
items are automatically set and cannot be selected.
[Off]
[On]
Description
Select the video signal
type from the HDMI
terminal.
Select the internal colour
space conversion method
when an RGB signal is
input.
Select the signal amplitude
range. Usually, select
"Normal".
Set whether or not to use
WIDE MODE based on
signal recognition,
including an HDMI signal.
Select "Digital" for audio
signal via the HDMI
terminal. Select "Analogue"
for audio signal via the
AUDIO jack.
35