Sharp Aquos LC-32B20E 운영 매뉴얼 - 페이지 10

{카테고리_이름} Sharp Aquos LC-32B20E에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Aquos LC-32B20E 44 페이지. Aquos lcd colour television

Quick guide

Before turning on the power

Standard DIN45325

plug (IEC 169-2)

75 q coaxial cable

Supplying power to the antenna

You must supply power to the antenna in order to

receive digitally/terrestrially broadcast stations after

connecting the antenna cable to the antenna input

terminal on the back of your TV.

1. Press menu and the menu screen displays.

2. Press c/d to select "Setup".

3. Press a/b to select "Antenna Setup-DIGITAL",

and then press oK.

4. Press a/b to select "Supply Voltage", and then

press oK.

5. Press c/d to select "On", and then press oK.

Setting the tV on the wall

• this tV should be mounted on the wall only with the wall mount bracket and attachment available from SHarp.

(page 39) the use of other wall mount brackets may result in an unstable installation and may cause serious

injuries.

• installing the lCD Colour tV requires special skill that should only be performed by qualified service personnel.

Customers should not attempt to do the work themselves. SHarp bears no responsibility for improper mounting

or mounting that results in accident or injury.

• You can ask a qualified service personnel about using an optional bracket and attachment to mount the TV to the wall.

• To use this TV mounted on a wall, first remove the adhesive tape at the 2 locations on the rear of the TV, and then use the

screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.

• When you mount the TV on the wall, you should attach the supporting post.

Cable clamp

Bundle the

cables with the

clamp.

1. Carefully insert the

CI Module in the CI slot

with the contact side

forward.

2. The logo on the CI

Module must be facing

forward from the rear of

the TV.

Place the TV close to the

AC outlet, and keep the

power plug within reach.

AC cord