Sharp Aquos LC-32DH57S 운영 매뉴얼 - 페이지 28

{카테고리_이름} Sharp Aquos LC-32DH57S에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Aquos LC-32DH57S 36 페이지. Lcd colour television

페이지 인쇄

Connecting a PC

Adjusting the PC image

automatically

This function enables the screen to be automatically

adjusted to its best possible condition when the analogue

terminals of the TV and PC are connected with a

commercially available DVI/RGB conversion cable, etc.

Setup

Auto Sync.

NOTE

•

"Auto Sync." may fail if the PC image has low resolution, has

unclear (black) edges, or is moved while executing "Auto

Sync.".

•

Be sure to connect the PC to the TV and switch it on before

starting "Auto Sync.".

•

"Auto Sync." can be executed only when inputting analogue

signals through the EXT 4 terminal.

Adjusting the PC image manually

Ordinarily you can easily adjust the picture as necessary

to change image position using "Auto Sync.". In some

cases, however, manual adjustment is needed to

optimise the image.

Setup

Fine Sync.

Press a/b to select the specific

adjustment item.

Press c/d to adjust the item to the

desired position.

H-Pos. [ 0] -30

[-5]

-20

V-Pos.

Clock

[ 0]

-15

[ 0]

Phase

-15

Centres the image by moving it to the left or

H-Pos.

right.

Centres the image by moving it up or down.

V-Pos.

Adjusts when the image flickers with vertical

Clock

stripes.

Adjusts when characters have low contrast or

Phase

when the image flickers.

NOTE

•

For resetting all adjustment items to the factory preset values,

press a/b to select "Reset", and then press ;.

•

"Clock" and "Phase" in the "Fine Sync." menu can be adjusted

only when inputting analogue signals through the EXT 4

terminal.

b30

b20

b15

Item