Sharp Aquos LC-32DH77V 운영 매뉴얼 - 페이지 37
{카테고리_이름} Sharp Aquos LC-32DH77V에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Aquos LC-32DH77V 48 페이지. Aquos lcd colour television
페이지 인쇄
Connecting a PC
Connecting a PC
HDMI Connection
PC
HDMI-certified cable
PC
ø 3.5 mm stereo minijack cable
DVI/HDMI cable
*
When using the HDMI2 terminal, you must select the proper item in
the "PC Audio Select" menu depending on the type of HDMI cable
connected (Refer to the right column for details).
Analogue Connection
PC
ø 3.5 mm stereo minijack cable
DVI/RGB conversion cable
PC
ø 3.5 mm stereo minijack cable
*
When using the EXT4 terminal, you must select "EXT4 (RGB)" in the
"PC Audio Select" menu (Refer to the right column for details).
NOTE
•
The PC input terminals are DDC1/2B-compatible.
•
Refer to page 38 for a list of PC signals compatible with the TV.
•
A Macintosh adaptor may be required for use with some Macintosh
computers.
HDMI1, 2* or 3
HDMI2*
RGB cable
EXT4*
EXT4*
Setting audio input
Option
PC Audio Select
When using the EXT4 terminal or HDMI2 terminal, you must
select which terminal uses the AUDIO (R/L) jack for analogue
audio input.
Item
HDMI2: When connecting devices (including a PC) with DVI/HDMI
cable to the HDMI2 terminal and inputting analogue audio
signals from the AUDIO (R/L) jack.
EXT4 (RGB): When connecting a PC to the EXT4 terminal, and
inputting analogue audio signals from the AUDIO (R/L) jack.
NOTE
•
You must set this to "EXT4 (RGB)" when connecting
devices (including a PC) with an HDMI-certified cable to the
HDMI2 terminal. If "HDMI2" is set, there will be no sound
output.
Displaying a PC image on the
screen
Selecting the picture size
You can select the picture size.
1
Press f.
•
The "WIDE MODE" menu displays.
2
Press f or a/b to select a desired item on the
menu.
NOTE
•
Connect the PC before making adjustments.
•
Selectable picture size may vary with input signal type.
EXAMPLE
Normal
Item
Full: An image fully fills the screen.
Cinema: For letterbox pictures. Bars may appear on the
top and bottom with some programmes.
Normal: Keeps the original aspect ratio in a full screen
display.
Dot by Dot: Displays an image with the same number of
pixels on the screen.
NOTE
•
Refer to page 29 for AV signals (See below).
HDMI: 480i/480p/576i/576p/720p/1080i/1080p
ANALOGUE RGB: 576p/720p (50Hz)/1080i
•
The ANALOGUE RGB terminal (PC) (EXT4) is not
compatible with 480i/576i/1080p signals.
Full
35