Sharp Aquos LC-32LE600S 운영 매뉴얼 - 페이지 23
{카테고리_이름} Sharp Aquos LC-32LE600S에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Aquos LC-32LE600S 36 페이지. Téléviseur couleur à écran
Sharp Aquos LC-32LE600S에 대해서도 마찬가지입니다: 운영 매뉴얼 (5 페이지), (스페인어) 매뉴얼 델 유저리오 (36 페이지), (프랑스어) Mode D'emploi (36 페이지)
페이지 인쇄
Basic adjustment
Additional Search
Use this menu to add new channels automatically after
auto installation has been completed.
Manual Search
Add new services within a specified channel bandwidth.
NOTE
You can search the channel bandwidth by pressing ; after
•
setting the value for both "From Channel" and "To Channel"
using c/d.
•
You can perform "Manual Search" with a service number only
when the four Nordic countries (Sweden, Norway, Finland or
Denmark) have been selected in the country setting (Page 9).
When another country has been selected, "Manual Search" is
not shown on the menu screen.
Channel Edit
This menu allows you to reconfigure some settings for
the channel currently selected.
Label
When a TV channel sends its Network Name, the "Auto
Installation" detects the information and assigns a
name to it. However, you can change channel names
individually.
Press a/b/c/d to select each character of
1
the new name for the channel, and then press
;.
2
Repeat step 1 above until the name is fully
spelt out.
NOTE
•
The name can be six characters or less.
•
If a channel name is less than six characters, select "END" to
set the channel name.
Frequency
You can adjust the frequency to the desired position (only
for analogue channels).
NOTE
•
Adjust while checking the background picture as a reference.
You can set the frequency by pressing c/d. Each time you
•
press c or d, the value is changed in increments of 0.05 MHz.
Colour System
Select the optimum colour system to receive ("Auto",
"PAL", "SECAM", "NTSC") (only for analogue channels).
Sound System
Select the optimum sound systems (Broadcasting
systems) to receive ("B/G", "A2 B/G", "D/K", "A2 D/K",
"A2 D/K1", "A2 D/K2", "I", "L", "L'") (only for analogue
channels).
Channel Skip
Channels with a ✔ mark are passed over when pressing
:r/s on the TV or remote control unit.
Press a/b to select the desired channel.
1
Press ; to set a ✔ mark at the channel that
2
you want to skip.
Channel Sort
The item position of channels can be sorted.
Press a/b to select the channel whose item
1
position you want to move, and then press
;.
Channel Number
Channel Name
Press a/b to move it to the desired position,
2
and then press ;.
Channel Number
Channel Name
3
Repeat steps 1 and 2 until all desired channel
items are sorted.
Decoder
When connecting a decoder to the TV, you need to select
channels that need to be decoded.
Channel Lock
When the channel is locked, you must enter your PIN
whenever you tune to the channel.
NOTE
•
See "Child Lock" for setting a PIN.
•
When "Channel Lock" is set for a channel, "Child lock has been
activated" displays, and the image and sound of the channel
are blocked.
When pressing 6 while "Child lock has been activated"
•
displays, the PIN input window will display. Inputting the correct
PIN unlocks the "Child Lock" temporarily until the power is
turned off.
•
In case you select "Italy" in the country setting (Page 9), the PIN
input window displays every time you tune in to the channels
with "Channel Lock" applied.
Channel Sort
Channel Sort
21